Trophy Hunting - Bear and Moose - (c) 2002 Sammy USA Corporation

             Trophy Hunting - Bear and Moose JAMMA Pinout

                          Main Jamma Connector
            Solder Side          |             Parts Side
------------------------------------------------------------------
             GND             | A | 1 |             GND
             GND             | B | 2 |             GND
             +5              | C | 3 |             +5
             +5              | D | 4 |             +5
                             | E | 5 |
             +12             | F | 6 |             +12
------------ KEY ------------| H | 7 |------------ KEY -----------
       Coin Counter B        | J | 8 |      Coin Counter A
       Coin Lockout B        | K | 9 |      Coin Lockout B
         Speaker (-)         | L | 10|        Speaker (+)
                             | M | 11|
        Video Green          | N | 12|        Video Red
        Video Sync           | P | 13|        Video Blue
       Service Switch        | R | 14|        Video GND
                             | S | 15|        Test Switch
        Coin Switch 2        | T | 16|        Coin Switch 1
        Start Player 2       | U | 17|        Start Player 1 
                             | V | 18|
                             | W | 19|
                             | X | 20|
                             | Y | 21|
                             | Z | 22|
                             | a | 23|
                             | b | 24|
                             | c | 25|
                             | d | 26|
             GND             | e | 27|             GND
             GND             | f | 28|             GND


               Main PCB Player 1 Gun Connection
   CN5 - 4 Pin Sub Connector   CN6 - 4 Pin Sub Connector
   -------------------------   ---------------------------
   1| +5 Volts - RED Wire      1|  - No Connection
   2| Trigger  - White Wire    2| Pump Switch - Green Wire
   3| Ground   - Black Wire    3| Pump Switch - Brown Wire
   4| Gun OPTO - Blue Wire     4|  - No Connection

               Main PCB Player 2 Gun Connection
   CN7 - 4 Pin Sub Connector   CN8 - 4 Pin Sub Connector
   -------------------------   ---------------------------
   1| +5 Volts - RED Wire      1|  - No Connection
   2| Trigger  - White Wire    2| Pump Switch - Green Wire
   3| Ground   - Black Wire    3| Pump Switch - Brown Wire
   4| Gun OPTO - Blue Wire     4|  - No Connection


CAUTION:  NEVER connect Gun unit to CN2

  When you connect the Gun unit to Main PCB, you must make
    sure and connect to the correct connectors which are
    CN5 & CN6 connectors and CN7 & CN8 connectors.

  The Gun unit uses a 10 pin connector and attaches to both
    the CN5 & CN6 connectors and CN7 & CN8 connectors.

  If you connect Gun unit to CN2, 8 pin connector, your
    PCB will sustain serious damage

NOTE: To use a HAPPS style hand guns, connect the HAPPS 4 pin connector
      to CN5 for Player 1 and to CN7 for Player 2, then set Dipswitch 2
      number 8 to ON for "Hand Gun Unit"

BrianT