Turkey Hunting USA - (c) 2001 Sammy USA Corporation Turkey Hunting USA JAMMA Pinout Main Jamma Connector Solder Side | Parts Side ------------------------------------------------------------------ GND | A | 1 | GND GND | B | 2 | GND +5 | C | 3 | +5 +5 | D | 4 | +5 | E | 5 | +12 | F | 6 | +12 ------------ KEY ------------| H | 7 |------------ KEY ----------- Coin Counter B | J | 8 | Coin Counter A Coin Lockout B | K | 9 | Coin Lockout B Speaker (-) | L | 10| Speaker (+) | M | 11| Video Green | N | 12| Video Red Video Sync | P | 13| Video Blue Service Switch | R | 14| Video GND | S | 15| Test Switch Coin Switch 2 | T | 16| Coin Switch 1 | U | 17| Start Player 1 | V | 18| | W | 19| | X | 20| | Y | 21| | Z | 22| | a | 23| | b | 24| | c | 25| | d | 26| GND | e | 27| GND GND | f | 28| GND CN5 - 4 Pin Sub Connector CN6 - 4 Pin Sub Connector ------------------------- --------------------------- 1| +5 Volts - RED Wire 1| - No Connection 2| Trigger - White Wire 2| Pump Switch - Green Wire 3| Ground - Black Wire 3| Pump Switch - Brown Wire 4| Gun OPTO - Blue Wire 4| - No Connection CAUTION: NEVER connect Gun unit to CN2 When you connect the Gun unit to Main PCB, you must make sure and connect to the correct connectors which are CN5 and CN6 connectors. The Gun unit uses a 10 pin connector and attaches to both the CN5 and CN6 connectors. If you connect Gun unit to CN2, 8 pin connector, your PCB will sustain serious damage NOTE: To use a HAPPS style hand gun, connect the HAPPS 4 pin connector to CN5 and set Dipswitch 2 number 8 to ON for "Hand Gun Unit" BrianT