TEKKEN 2 JAMMA edge connector (56p 3.96mm pitch) SOLDER SIDE PARTS SIDE A- GND 1- GND B- GND 2- GND C- +5V 3- +5V D- +5V 4- +5V E- 5- F- +12V 6- +12V H- Key 7- Key J- Coin counter 2 8- Coin counter 1 K- 9- Coin lockout 1 L- Speaker (-) 10- Speker (+) M- Audio (GND) 11- Audio(+) N- Video green 12- Video red P- Vidéo sync 13- Video Blue R- Service switch 14- Videp GND S- 15- Test Switch T- Coin switch 2 16- Coin switch 1 U- 2P Start swich 17- 1P Start switch V- 2P UP 18- 1P UP W- 2P DOWN 19- 1P DOWN X- 2P LEFT 20- 1P LEFT Y- 2P RIGHT 21- 1P RIGHT Z- 2P Punch button 1 22- 1p Punch button 1 a- 2P Puch button 2 23- 1P Puch button 2 b- 24- c- 25- d- 26- e- GND 27- GND f- GND 28- GND Extended edge connector (48p 2.54mm pitch) SOLDER SIDE PARTS SIDE A1- Speaker R (-) B1- Speaker R (+) A2- B2- A3- B3- A4- B4- A5- Key B5- Key A6- B6- A7- B7- A8- 2P Kick buttom 1 B8- 2P Kick buttom 2 A9- B9- GND A10- B10- GND A11- B11- A12- B12- A13- B13- A14- B14- A15- B15- A16- B16- A17- B17- A18- B18- A19- B19- 1P Kick buttom 2 A20- 1P Kick buttom 1 B20- A21- B21- A22- B22- A23- B23- A24- B24- Do not connect anything to the blank connectors Both lockout solenoid and coin conter operate on +12v Connect the switches to N.O. terminal such as a microswitch, and the GND to the COM terminal Thje supply voltage is availlable withing +/- 5%. For use in the best condition, get the supply voltage as close to the specified voltage as possible. (recommended power capacity) +5V +/- 5% 2.5A or more +12V +/- 5% 2.0A or more Connection to stero cabinet -1 STEREO/MONO setting Select SPEAKER OUT in the game option screen at the test menu screen Caution : Monophonique cabinets do output only the left-hand sound even if the stereophonic setting selected. -2 Connection to speakers -connect the (L) speaker to the speaker output of 56P edge connector (JAMMA) on the PC board. -connect the (R ) speaker to speaker R (+), (-) of 48P extended odge connector.