I previouly swapped the FAST/SLOW pinouts along with my other changes. My harness was wired incorrectly and I am changing the FAST/SLOW back to original position. Typed in by Jonathan Deitch (jdeitch@umiami.miami.edu) Modified 1-11-95: Gary Ransom (ransom@lobby.ti.com) Game: Moon Patrol 44 Pin Wiring List Solder Side Parts Side | --------------------------------|----------------------------------- GND | A | 1 | GND ----------------------------|---|---|------------------------------- GND | B | 2 | GND ----------------------------|---|---|------------------------------- | C | 3 | ----------------------------|---|---|------------------------------- | D | 4 | ----------------------------|---|---|------------------------------- | E | 5 | SLOW ----------------------------|---|---|------------------------------- | F | 6 | FAST ----------------------------|---|---|------------------------------- | H | 7 | FIRE ----------------------------|---|---|------------------------------- 1 Player Start | J | 8 | 2 Player Start ----------------------------|---|---|------------------------------- | K | 9 | ----------------------------|---|---|------------------------------- Composite Sync (Video) | L | 10| ----------------------------|---|---|------------------------------- | M | 11| ----------------------------|---|---|------------------------------- +12 V DC | N | 12| ----------------------------|---|---|------------------------------- Speaker | P | 13| Speaker ----------------------------|---|---|------------------------------- | R | 14| JUMP ----------------------------|---|---|------------------------------- Video Green | S | 15| Video Red ----------------------------|---|---|------------------------------- | T | 16| Video Blue ----------------------------|---|---|------------------------------- | U | 17| ----------------------------|---|---|------------------------------- | V | 18| ----------------------------|---|---|------------------------------- Coin Slot 1 | W | 19| Coin Slot 2 ----------------------------|---|---|------------------------------- + 5 V DC | X | 20| + 5 V DC ----------------------------|---|---|------------------------------- + 5 V DC | Y | 21| + 5 V DC ----------------------------|---|---|------------------------------- | Z | 22| GND -------------------------------------------------------------------- Note: The silkscreen lettering on the PCB is numbered from 1 to 43 odd from the right to the left on the component side. Pin 1 above corresponds to pin 1 on the card. -- -------------------------------------------------------------------------- Gary Ransom Internet: ransom@lobby.ti.com Texas Instruments, Inc. TI-MSG: GAR2 PO Box 660246 MS 3145 PHONE: (214) 480-3073 Dallas, TX 75266 FAX: (214) 480-2214